AMS5010LT データシートの表示（PDF） - Advanced Monolithic Systems Inc

部品番号

コンポーネント説明

一致するリスト

AMS5010LT

1.2V VOLTAGE REFERENCE

Advanced Monolithic Systems Inc 

AMS5010

ABSOLUTE MAXIMUM RATINGS

Reverse Current

10mA

Forward Current

10mA

Operating Temperature Range

NT, MT, LN, HN, GN

0°C to 70°C

LT, KT, JT

-55°C to +125°C

Storage Temperature TO-92 package

Storage Temperature TO-52 package

Lead Temperature (Soldering 25 sec.)

Maximum Power Dissipation (at 25°C)

TO-52

TO-92

-65°C to +150°C

-65°C to +200°C

265°C

750mW

600mW

ELECTRICAL CHARACTERISTICS

Electrical Characteristics at IR = 500 µA, and TA = +25°C unless otherwise specified.

Parameter

Conditions

AMS5010

Min

Typ

Reference Voltage

IR = 100 µA

1.20

1.220

Reference Current (Note 3)

50

100

Reverse Current

To rated specs.

50

Dynamic Output Impedance IR = 100 µA

.6

IR = 500 µA

.6

RMS Noise Voltage

IR = 500 µA,

5

(Note 4)

10Hz ≤ f ≤ 10kHz

Temperature Coefficient

50µA ≤ IR ≤ 5mA

(Note 5)

TMIN ≤ TA ≤ TMAX

AMS5010G – J

30

AMS5010H – K

25

AMS5010L

10

AMS5010M

5

AMS501N

3

Max

1.25

5000

100

2

100

50

25

10

5

Units

V

µA

µA

Ω

Ω

µV

ppm/°C

ppm/°C

ppm/°C

ppm/°C

ppm/°C

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the

device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical

Characteristics. The guaranteed specifications apply only for the test conditions listed.

Note 2: For elevated temperature operation, Tj max is ≤+150°C

Thermal Resistance

TO-92

ϕ JA (junction to ambient) 170°C/W (0.125” leads)

TO-52

140°C/W

Note 3: Optimum performance is obtained at currents below 500µA. For current operation below 200µA, stray shunt capacitances should be limited to 20pF

or increased to 1µF. If strays can not be avoided, a shunt capacitor of at least 1000pF is recommended.

Note 4: Guaranteed but not 100% production tested. These limits are not used to calculate average outgoing quality levels.

Note 5: The average temperature coefficient is defined as the maximum deviation of reference voltage at all measured temperatures between the operating

TMAX

and TMIN, divided by TMAX - TMIN.

Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723

Share Link: