CAT5126 データシートの表示（PDF） - Catalyst Semiconductor => Onsemi
部品番号
コンポーネント説明
一致するリスト
CAT5126 Datasheet PDF : 11 Pages
| |||
CAT5126
One-Time Digitally Programmable 32-Tap Potentiometer
FEATURES
Wiper position stored after one-time non-
volatile programming
User-defined Power-On wiper position
32-tap positions
Wiper position programmed through simple 2-
wire serial interface
Low 0.35µA (typ) static supply current
2.5V to 5.5V single-supply operation
10kΩ, 50kΩ, and 100kΩ end-to-end resistances
50ppm/°C end-to-end temperature coefficient
and 5ppm/°C ratiometric temperature
coefficient
TDFN 8-pad (2 x 3mm) and MSOP 8-lead packages
APPLICATIONS
Mechanical potentiometer replacement
Products using one-time factory calibration
Contrast, brightness, volume controls
Programmable analog functions
DESCRIPTION
The CAT5126 is a digital programmable
potentiometer. The wiper position is controlled with a
simple 2-wire digital interface. This digital
potentiometer is unique in that it has an optional one-
time programmable feature that either sets the wiper’s
position upon power-on to a user-defined value, or the
wiper can be set and the interface also disabled to
prevent further adjustment.
The CAT5126 has an end-to-end resistance of 10kΩ,
50kΩ, and 100kΩ. All CAT5126 devices have
32-wiper positions and operate from a single 2.5V to
5.5V supply.
The CAT5126 is available in TDFN 8-pad and MSOP
8-lead packages. Each device is guaranteed over the
industrial temperature range of -40°C to +85°C.
For Ordering Information details, see page 10.
PIN CONFIGURATION
MSOP (Z)
(top view)
RW 1
8 RH
¯C¯S¯ 2 CAT 7 RL
VDD 3 5126 6 U/D¯
GND 4
5 VPP
TDFN (VP2)
(top view)
RW 1
¯C¯S¯ 2
VDD 3
GND 4
8 RH
7 RL
6 U/D¯
5 VPP
FUNCTIONAL DIAGRAM
VDD 3
GND
4
2
CS
U/D 6
UP/DOWN
COUNTER
32-POSITION
DECODER
RH
8
R31
R30
ONE-TIME
5
VPP
PROGRAM
BLOCK
R2
R1
7
RL
RW 1
RW
© Catalyst Semiconductor, Inc.
1
Characteristics subject to change without notice
Doc. No. MD-2129 Rev. B
Share Link: 