MC100E336FNR2 データシートの表示（PDF） - ON Semiconductor
部品番号
コンポーネント説明
一致するリスト
MC100E336FNR2 Datasheet PDF : 8 Pages
| |||
MC10E336, MC100E336
100E SERIES PECL DC CHARACTERISTICS VCCx= 5.0 V; VEE= 0.0 V (Note 1.)
0°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
IEE
VOH
VOL
VIH
VIL
VCUT
IIH
Power Supply Current
125 150
125 150
144 173 mA
Output HIGH Voltage (Note 2.)
3975 4050 4120 3975 4050 4120 3975 4050 4120 mV
Output LOW Voltage (Note 2.)
3190 3295 3380 3190 3255 3380 3190 3260 3380 mV
Input HIGH Voltage
3835 4050 4120 3835 4120 4120 3835 4120 4120 mV
Input LOW Voltage
3190 3300 3525 3190 3525 3525 3190 3525 3525 mV
Cut-off Output Voltage (Note 2.)
2.9
2.97 2.9
2.97 2.9
2.97 V
Input HIGH Current
µA
RXEN
225
225
225
All Other Inputs
150
150
150
IIL
Input LOW Current
0.5 0.3
0.5 0.25
0.5 0.2
µA
NOTE: Devices are designed to meet the DC specifications shown in the above table, after thermal equilibrium has been established. The
circuit is in a test socket or mounted on a printed circuit board and transverse air flow greater than 500 lfpm is maintained.
1. Input and output parameters vary 1:1 with VCC. VEE can vary +0.46 V / –0.8 V.
2. Outputs are terminated through a 50 ohm resistor to VCC –2.10 volts.
100E SERIES NECL DC CHARACTERISTICS VCCx= 0.0 V; VEE= –5.0 V (Note 1.)
0°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
IEE
VOH
VOL
VIH
VIL
VCUT
IIH
Power Supply Current
125 150
125 150
144 173 mA
Output HIGH Voltage (Note 2.)
–1025 –950 –880 –1025 –950 –880 –1025 –950 –880 mV
Output LOW Voltage (Note 2.)
–1810 –1705 –1620 –1810 –1745 –1620 –1810 –1740 –1620 mV
Input HIGH Voltage
–1165 –950 –880 –1165 –880 –880 –1165 –880 –880 mV
Input LOW Voltage
–1810 –1700 –1475 –1810 –1475 –1475 –1810 –1475 –1475 mV
Cut-off Output Voltage (Note 2.)
2.9
2.97 2.9
2.97 2.9
2.97 V
Input HIGH Current
RXEN
225
All Other Inputs
150
225
1502
µA
225
150
IIL
Input LOW Current
0.5 0.3
0.5 0.25
0.5 0.2
µA
NOTE: Devices are designed to meet the DC specifications shown in the above table, after thermal equilibrium has been established. The
circuit is in a test socket or mounted on a printed circuit board and transverse air flow greater than 500 lfpm is maintained.
1. Input and output parameters vary 1:1 with VCC. VEE can vary +0.46 V / –0.8 V.
2. Outputs are terminated through a 50 ohm resistor to VCC –2.10 volts.
http://onsemi.com
4
Share Link: 