APL3207 データシートの表示（PDF） - Anpec Electronics
部品番号
コンポーネント説明
一致するリスト
APL3207 Datasheet PDF : 19 Pages
| |||
APL3207
Ordering and Marking Information
APL3207
Assembly Material
Handling Code
Temperature Range
Package Code
Package Code
QA : DFN3x3-10
Operating Ambient Temperature Range
I : - 40 to 85 oC
Handling Code
TR : Tape & Reel
Assembly Material
L : Lead Free Device G : Halogen and Lead Free Device
APL3207 QA :
APL
3207
XXXXX
XXXXX - Date Code
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020C for
MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
Absolute Maximum Ratings (Note 1)
Symbol
Parameter
Rating
Unit
VIN, VLDOIN
VIN, VLDOIN to GND Voltage
-0.3 to 7
V
VSET, VSTAT, VBATT ISET, STAT, BATT to GND Voltage
-0.3 to 7
V
ICHG
Charge Current
800
mA
PD
Power Dissipation
TJ
Maximum Junction Temperature
TSTG
Storage Temperature Range
TSDR
Maximum Lead Soldering Temperature, 10 Seconds
Internally Limited
W
-40 to 150
oC
-65 to 150
oC
260
oC
Note1: Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are
stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recom-
mended operating conditions" is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device
reliability.
Thermal Characteristic (Note 2)
Symbol
Parameter
Typical Value
Unit
Junction to Ambient Resistance in Free Air
θJA
50
DFN3x3-10
°C/W
Note 2 : θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. The exposed
pad of DFN-10 is doldered directly on the PCB.
Recommended Operating Conditions (Note 3)
Symbol
VIN
ICHG
VLD OI N
VIN to GND Voltage
Charge Current
LDOIN to GND Voltage
ILD O
LDO Output Current
TA
Ambient Temperature
TJ
Junction Temperature
Note 3 : Refer to the typical application circuit.
Parameter
Range
Unit
4.35 to 6.5
V
0.1 to 0.7
A
3.6 to 6.5
V
0 to 0.15
A
-40 to 85
oC
-40 to 125
oC
Copyright © ANPEC Electronics Corp.
2
Rev. A.3 - Sep., 2012
www.anpec.com.tw
Share Link: 