AP1513S データシートの表示（PDF） - Diodes Incorporated.
部品番号
コンポーネント説明
一致するリスト
AP1513S Datasheet PDF : 8 Pages
| |||
AP1513
PWM CONTROL 2A STEP-DOWN CONVERTER
Features
• Input voltage: 3.6V to 18V
• Output voltage: 0.8V to VCC
• Duty ratio: 0% to 100% PWM control
• Oscillation frequency: 300KHz typ.
• Soft-start, Current limit, Enable function
• Thermal Shutdown function
• Built-in internal SW P-channel MOS
• SOP-8L: Available in “Green” Molding Compound
• Lead Free Finish/RoHS Compliant (Note 1)
General Description
AP1513 consists of step-down switching regulator with PWM
control. These devices include a reference voltage source,
oscillation circuit, error amplifier, and internal PMOS.
AP1513 provides low-ripple power, high efficiency, and excellent
transient characteristics. The PWM control circuit is able to vary
the duty ratio linearly from 0 up to 100%. This converter also
contains an error amplifier circuit as well as a soft-start circuit that
prevents overshoot at startup. An enable function, an over
current protect function and a short circuit protect function are built
inside, and when OCP or SCP happens, the operation frequency
will be reduced from 300KHz to 30KHz. Also, an internal
compensation block is built in to minimum external component
count.
With the addition of an internal P-channel Power MOS, a coil,
capacitors, and a diode connected externally, these ICs can
function as step-down switching regulators. They serve as ideal
power supply units for portable devices when coupled with the
SOP–8L mini-package, providing such outstanding features as
low current consumption. Since this converter can accommodate
an input voltage up to 18V, it is also suitable for the operation via
an AC adapter.
Applications
• PC Motherboard
• LCD Monitor
• Graphic Card
• DVD-Video Player
• Telecom Equipment
• ADSL Modem
• Printer and other Peripheral Equipment
• Microprocessor core supply
• Networking power supply
Ordering Information
AP1513 X X X
Package
S : SOP-8L
Lead Free
L : Lead-Free
G : Green
Packing
- U : Tube
-13 : Taping
Note: 1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Device
AP1513S
Package
Code
S
Packaging
(Note 2)
SOP-8L
Tube/Bulk
Quantity Part Number
Suffix
100
-U
13” Tape and Reel
Quantity
Part Number
Suffix
2500/Tape & Reel
-13
Note: 2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
AP1513 Rev. 2
1 of 8
www.diodes.com
AUGUST 2007
© Diodes Incorporated
Share Link: 