AMSR1-78Z データシートの表示（PDF） - AIMTEC

部品番号

コンポーネント説明

一致するリスト

AMSR1-78Z

Up to 5 Watt | DC-DC Switching Regulator

AIMTEC 

Application Circuits

Recommended soft start circuit

+Vin

1mS

( Minimum)

C1

GND

AMSR1-78Z

Series AMSR1-78Z

Up to 5 Watt | DC-DC Switching Regulator

+ Vout

C2

GND

To protect converter during pow-er up use “soft start” Vin and C1 = 47 uF

C 2 = 10 uF( optional )

Wide input isolated (up to 6000VDC) dual outputs with high efficiency

+Vin

C1

AMSR1-78Z C2

DC

DC

+Vout

COM

GND

-Vout

Isolated Dual Outputs

Wide Input Range 6.5V to 18V

C1: Optional

C2: Required for Decoupling (further decoupling may be required

between the two converters).

Isolated (up to 6000VDC) single and regulated output

+Vin

DC

DC C1

AMSR1-78Z

C2

+Vout

GND

-Vout

Isolated Single Output

Wide Input Range 6.5V to 18V

Point of Load Architecture

Improved Line/Load Regulation

C1: Required for Decoupling (further decoupling may be required

between the two converters).

C2: Optional

NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled

by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the

date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,

nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components

and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This

product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate

specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.

www.aimtec.com

F 051e R11.F

Tel: +1 514 620 2722

3 of 3

Toll free: + 1 888 9 AIMTEC

(924 6832)

North America only

Share Link: