ADL5374ACPZ-WP データシートの表示（PDF） - Analog Devices

部品番号

コンポーネント説明

一致するリスト

ADL5374ACPZ-WP

3000 MHz to 4000 MHz Quadrature Modulator

Analog Devices 

ADL5374

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS

COM1 1

COM1 2

VPS1 3

VPS1 4

VPS1 5

VPS1 6

ADL5374

TOP VIEW

(Not to Scale)

18 VPS5

17 VPS4

16 VPS3

15 VPS2

14 VPS2

13 VOUT

Figure 2. Pin Configuration

Table 3. Pin Function Descriptions

Pin No.

Mnemonic

1, 2, 7, 10 to 12, 21, 22 COM1 to COM4

3 to 6, 14 to 18

VPS1 to VPS5

8, 9

13

19, 20, 23, 24

LOIP, LOIN

VOUT

IBBP, IBBN, QBBN, QBBP

Exposed Paddle

Description

Input Common Pins. Connect to ground plane via a low impedance path.

Positive Supply Voltage Pins. All pins should be connected to the same supply (VS).

To ensure adequate external bypassing, connect 0.1 μF capacitors between each pin and

ground. Adjacent power supply pins of the same name can share one capacitor (see Figure 25).

50 Ω Differential Local Oscillator Inputs. Internally dc-biased. Pins must be ac-coupled.

See Figure 8 for LO input impedance.

Device Output. Single-ended RF output. Pin should be ac-coupled to the load. The output

is ground referenced.

Differential In-Phase and Quadrature Baseband Inputs. These high impedance inputs

must be dc-biased to 500 mV dc and must be driven from a low impedance source.

Nominal characterized ac signal swing is 700 mV p-p on each pin. This results in a

differential drive of 1.4 V p-p with a 500 mV dc bias. These inputs are not self-biased and

must be externally biased.

Connect to ground plane via a low impedance path.

Rev. 0 | Page 6 of 20

Share Link: