EE-SPW421 データシートの表示（PDF） - OMRON Corporation

部品番号

コンポーネント説明

一致するリスト

EE-SPW421

Pre-wired Photomicrosensor with Amplifier and Cable

OMRON Corporation 

Ratings and Specifications

EE-SPW321/421

Item

Models

EE-SPW321, EE-SPW421

EE-SPW321-A, EE-SPW421-A

Sensing distance

300 mm *1

Sensing object

Opaque: 2 mm dia. min. *2

Directional angle

10° to 40°

Light source

GaAs infrared LED (pulse lighting) with a peak wavelength of 940 nm

Indicator

Light indicator (Red LEDs, one each on Sensor and Amplifier)

Supply voltage

12 to 24 VDC ±10%, ripple (p-p): 5% max.

Current consumption

Average: 30 mA max.

Control output

NPN open collector, Load power supply voltage: 12 to 24 VDC,

Load current: 100 mA max.,

OFF current: 0.5 mA max.

Residual voltage: 1 V max (at a 100-mA load current)

Response time

1 ms max. for both detection and reset

Ambient illumination

3,000 lx max. (incandescent light); 10,000 lx max. (sunlight) on the receiver

Ambient temperature range

−20 to +55°C

Ambient humidity range

5% to 85%

Vibration resistance

Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 h each in X, Y, and Z directions

Shock resistance

500 m/s2

Degree of protection

IEC IP64

Connecting method

Pre-wired (standard cable length: 2 m)

Cable length from emitter (receiver) to

amplifier

0.5 m

1m

Weight (Packaged)

76 g

Material

Case

Lens

ABS resin

Acrylate resin

Accessories

Slits: 0.5 × 3 mm, 1 × 3 mm, 3 × 0.5 mm, 3 × 1 mm (one each)

Sems screws with spring washers and flat washers: Six M2.6 × 12

Instruction Manual

*1. Refer to Receiver Output Vs. Sensing Distance Characteristics on the next page.

*2. Detection of objects up to 0.5 mm wide is possible by using slit installation.

2

Share Link: