GT11-2P-5.2C データシートの表示（PDF） - HIROSE ELECTRIC

部品番号

コンポーネント説明

一致するリスト

GT11-2P-5.2C

Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines

HIROSE ELECTRIC 

BTermination sequence

1Strip the cable.

Shield

Cable

6Insert the internal terminals into the Outer terminals.

The joined side of the crimp portion faces upward

(for both male and female).

2Cut the shield and expose the wire.

Wire

3Cut back the shield above the sheath and wrap with

conductive tape.

7Crimp the Outer terminal.

The shield must be visible.

4Strip the wire and form it.

Conductor

Jig used: Outside tube caulking jig.

(Refer to Page 91 for detail.)

8Insert the terminal into the housing.

(Please insert until the terminal is stopped by the lance.)

Jig used: Cable-forming strip jig

(Refer to Page 85 for detail.)

5Crimp the wire to the internal terminal.

1mm max.

9Mount the retainer to complete the task.

Jig used: Automatic crimping machine.

(Refer to Page 85 for detail.)

Refer to Page 84 for information

about the retainer mounting

method.

83

Share Link: