AIC1723 データシートの表示（PDF） - Analog Intergrations

部品番号

コンポーネント説明

一致するリスト

AIC1723

500mA Low Dropout Linear Regulator

Analog Intergrations 

AIC1723

PIN DESCRIPTION

VOUT PIN - Output pin.

GND PIN - Power GND.

VIN PIN - Power Supply Input.

APPLICATION INFORMATIONS

A 4.7µF (or greater) capacitor is required between

the AIC1723 output and ground for stability.

Without this capacitor the part will oscillate. Even

though most types of capacitor may work, the

equivalent series resistance (ESR) should be held

to 5Ω or less if Aluminum electrolytic type is used.

Many Aluminum electrolytics have electrolytes that

freeze at about -30°C, so solid tantalums are

recommended for operation below -25°C. The

value of this capacitor may be increased without

limit.

A 0.1µF capacitor (or greater) should be placed

from the AIC1723 input to ground if the lead

inductance between the input and power source

exceeds 500nH (approximately 10 inches of

trace).

6

Share Link: