DDR2 DRAM
Supports one DDR2 DRAM bank
that can be configured as
32M/64M/128Mbyte
16-bit DDR2 DRAM data bus
supported. System totally supports up
to 128Mbyte DDR2 DRAM memory
space
Supports Green Ethernet
Cable length power saving
Power down power saving
Supports pre-IEEE 802.3az Energy Efficient
Ethernet ability for 1000Base-T, 100base-
TX in full duplex operation and 10base-T in
full/half duplex mode
Other Add-on-Value Features
RTL8198
Datasheet
Supports Link Down Power Saving in
Ethernet PHYceivers
Supports two hardware timers and one
watchdog timer
Per-port configurable auto-crossover
function
Built-in regulator controller
DDR1 DRAM to transform 3.3V to
2.5V via an external BJT transistor
DDR2 DRAM to transform 3.3V to
1.8V via an external BJT transistor
Supports Non-Flash Boot Interface
(NFBI)
Single 25MHz crystal or 40MHz clock
input
LQFP216-E-PAD package
IEEE 802.11n Gigabit Ethernet AP/Router Network Processor
4
Track ID: JATR-2265-11 Rev. 0.91