R1221N15XH-TR データシートの表示（PDF） - RICOH Co.,Ltd.

部品番号

コンポーネント説明

一致するリスト

R1221N15XH-TR

Step-down DC/DC Converter with Voltage Detector

RICOH Co.,Ltd. 

3. Capacitor

As for CIN, use a capacitor with low ESR(Equivalent Series Resistance) and a capacity of at least 10mF for stable

operation.

COUT can reduce ripple of Output Voltage, therefore 47mF to 100mF tantalum type is recommended.

4. Lx Transistor

Pch Power MOS FET is required for this IC.

Its breakdown voltage between gate and source should be a few volt higher than Input Voltage.

In the case of Input Voltage is low, to turn on MOS FET completely, select a MOS FET with low threshold voltage.

If a large load current is necessary for your application and important, choose a MOS FET with low ON resistance

for good efficiency.

If a small load current is mainly necessary for your application, choose a MOS FET with low gate capacity for good

efficiency.

Maximum continuous drain current of MOS FET should be larger than peak current, ILmax.

12345

Rev. 1.11

- 10 -

Share Link: