MAX4133 データシートの表示（PDF） - Maxim Integrated
部品番号
コンポーネント説明
一致するリスト
MAX4133
Maxim Integrated
MAX4133 Datasheet PDF : 16 Pages
| |||
MAX4130–MAX4134
Single/Dual/Quad, Wide-Bandwidth, Low-Power,
Single-Supply, Rail-to-Rail I/O Op Amps
General Description
The MAX4130–MAX4134 family of operational amplifiers
combines 10MHz gain-bandwidth product and excellent
DC accuracy with rail-to-rail operation at the inputs and
outputs. These devices require only 900µA per amplifier,
and operate from either a single supply (+2.7V to +6.5V)
or dual supplies (±1.35V to ±3.25V) with a common-
mode voltage range that extends 250mV beyond VEE
and VCC. They are capable of driving 250Ω loads and
are unity-gain stable. In addition, the MAX4131/
MAX4133 feature a shutdown mode in which the outputs
are placed in a high-impedance state and the supply
current is reduced to only 25µA per amplifier.
With their rail-to-rail input common-mode range and
output swing, the MAX4130–MAX4134 are ideal for low-
voltage, single-supply operation. Although the minimum
operating voltage is specified at 2.7V, the devices
typically operate down to 1.8V. In addition, low offset
voltage and high speed make them the ideal signal-
conditioning stages for precision, low-voltage data-
acquisition systems. The MAX4130 is offered in the
space-saving 5-pin SOT23 package. The MAX4131 is
offered in the ultra-small 6-bump, 1mm x 1.5mm chip-
scale package (UCSP™).
PART
MAX4130
MAX4131
MAX4132
MAX4133
MAX4134
AMPS PER
PACKAGE
1
1
2
2
4
Selector Guide
SHUTDOWN
MODE
—
Yes
—
Yes
—
PIN-
PACKAGE
5 SOT23
6 UCSP,
8 µMAX/SO
8 µMAX/SO
14 SO
14 SO
________________________Applications
Battery-Powered Instruments
Portable Equipment
Data-Acquisition Systems
Signal Conditioning
Low-Power, Low-Voltage Applications
Pin Configurations appear at end of data sheet.
Features
o 6-Bump UCSP (MAX4131)
o +2.7V to +6.5V Single-Supply Operation
o Rail-to-Rail Input Common-Mode Voltage Range
o Rail-to-Rail Output Voltage Swing
o 10MHz Gain-Bandwidth Product
o 900µA Quiescent Current per Amplifier
o 25µA Shutdown Function (MAX4131/MAX4133)
o 200µV Offset Voltage
o No Phase Reversal for Overdriven Inputs
o Drive 250Ω Loads
o Stable with 160pF Capacitive Loads
o Unity-Gain Stable
Ordering Information
PART
MAX4130EUK-T
MAX4131C/D
MAX4131EBT-T
MAX4131EUA
MAX4131ESA
TEMP RANGE
-40°C to +85°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-
PACKAGE
5 SOT23
Dice*
6 UCSP
8 µMAX
8 SO
TOP
MARK
AABB
—
AAX
—
—
*Dice are specified at TA = +25°C. DC parameters only.
Ordering Information continued at end of data sheet.
Typical Operating Circuit
+3V
SERIAL
INTERFACE
MAX147
3
SHDN
6 DOUT
VDD 1
AIN 2
8 SCLK
VREF 4
7 CS
GND 5
MAX4131
UCSP is a trademark of Maxim Integrated Products, Inc.
For pricing, delivery, and ordering information, please contact Maxim Direct
at 1-888-629-4642, or visit Maxim’s website at www.maximintegrated.com.
19-1089; Rev 4; 1/14
Share Link: