datasheetbank_Logo
データシート検索エンジンとフリーデータシート

M38504M6-201FP データシートの表示(PDF) - MITSUBISHI ELECTRIC

部品番号
コンポーネント説明
一致するリスト
M38504M6-201FP
Mitsubishi
MITSUBISHI ELECTRIC  Mitsubishi
M38504M6-201FP Datasheet PDF : 52 Pages
First Prev 21 22 23 24 25 26 27 28 29 30 Next Last
b7
b0
PWM control register
(PWMCON : address 001D16)
PWM function enable bit
0: PWM disabled
1: PWM enabled
Count source selection bit
0: f(XIN)
1: f(XIN)/2
Not used (return “0” when read)
Fig. 22 Structure of PWM control register
MITSUBISHI MICROCOMPUTERS
3850 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
PWM output
PWM register
write signal
B= C
A
B
C
T T2
T
T
T2
(Changes “H” term from “A” to “B”.)
PWM prescaler
write signal
(Changes PWM period from “T” to “T2”.)
When the contents of the PWM register or PWM prescaler have changed, the PWM
output will change from the next period after the change.
Fig. 23 PWM output timing when PWM register or PWM prescaler is changed
sNote
The PWM starts after the PWM enable bit is set to enable and "L" level is output from the PWM pin.
The length of this "L" level output is as follows:
n+1
sec
2 • f(XIN)
(Count source selection bit = 0, where n is the value set in the prescaler)
n+1
sec (Count source selection bit = 1, where n is the value set in the prescaler)
f(XIN)
22

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]