PI74ALVTC16240 1122334455667788990011223344556677889900112233445566778899001122112233445566778899001122334455667788990011223344556677889900112211223344556677889900112233445566778899001122334455667788990011221122334455667788990011223344556677889900112233445566778899001122112233445566778899001122
16-Bit Buffer/Driver
with 3-State Outputs
Product Features
PI74ALVTC family is designed for low voltage operation,
VDD = 1.8V to 3.6V
Supports Live Insertion
3.6V I/O Tolerant Inputs and Outputs
Bus Hold
High Drive, -32/64mA @ 3.3V
Uses patented noise reduction circuitry
Power-off high impedance inputs and outputs
Industrial operation at 40°C to +85°C
Packages available:
48-pin 240 mil wide plastic TSSOP (A)
48-pin 173 mil wide plastic TVSOP (K)
48-pin 300 mil wide plastic SSOP (V)
Logic Block Diagram
Product Description
Pericom Semiconductors PI74ALVTC series of logic circuits are
produced in the Companys advanced 0.35 micron CMOS tech-
nology, achieving industry leading speed.
The PI74ALVTC16240 buffer/driver is designed specifically to
improve both the performance and density of 3-state memory
address drivers, clock drivers, and bus-oriented receivers and
transmitters.
The device can be used as four 4-bit buffers, two 8-bit buffers, or
one 16-bit buffer. It provides inverting outputs and symmetrical
active-low output-enable (OE) inputs.
To ensure the high-impedance state during power up or power
down, OE should be tied to Vdd through a pullup resistor; the
minimum value of the resistor is determined by the current-sink-
ing capability of the driver.
The family offers both I/O Tolerant, which allows it to operate in
mixed 1.8/3.6V systems, and Bus Hold, which retains the data
inputs last state whenever the data input goes to high-impedance,
preventing floating inputs and eliminating the need for pullup/
down resistors.
1
PS8353A 11/23/98