Beyond Innovation Technology Co., Ltd.
BIT3713
Wave Soldering:
Conventional single wave soldering is not recommended for surface mount devices (SMDs) or printed-circuit boards
with a high component density, as solder bridging and non-wetting can present major problems.
Manual Soldering:
Fix the component by first soldering two diagonally-opposite end leads. Use a low voltage (24 V or less) soldering
iron applied to the flat part of the lead. Contact time must be limited to 10 seconds at up to 300 °C. When using a
dedicated tool, all other leads can be soldered in one operation within 2 to 5 seconds between 270 and 320 °C.
Package Information :
SOP type :
‘05/12/15
Preliminary
BiTEK
December 20, 2005
DCC CONTROLLED
Confidential, for authorized user only
page 10 of 11