MK50H27
the receipt of an MSU after having entered congestion. This primitive
indicates that the remote node congestion has abated.
1111110000000000
5432109876543210
C
R
J
Y
C
L
E
E
S
E
N
0
S
U0
T
E
0
0
S
S
7
E
IADR<23:16>
4.1.2.3 Control and Status Register 2 (CSR2)
RAP<3:1> = 2
BIT
NAME
DESCRIPTION
15
CYCLE
Setting this bit selects a shorter DMA cycle (5 vs 6 SYSCLKs for bursting
or 5 vs 7 SYSCLKs for single DMA). See Figures 7a and 8a for details.
14
ESEN
Extended Scaler Enable. Setting this bit enables the use of the 16-bit
timer pre-scaler at IADR+24 rather than the 8-bit Scaler at IADR+02.
Using the 16-bit Scaler allows longer timer values at higher SYSCLK
rates. Set ESEN=0 for backward compatibility with the MK50H27.
13
0
Reserved, must be written as zeroes.
12
RSUTE
Received SU Timer Enable. Setting this bit enables a timer for detecting
more than 32xTP time between received Signal Units. If RSUTE=1,
PPRIM=5 will be issued upon expiry of the Received SU Timer. A typi-
cal use for RSUT is to detect breaking of the serial data connection.
11:09
0
Reserved, must be written as zeroes.
08
JSS7E
Japanese SS7 Enable. Setting this bit enables TTC JT-Q703 compliance.
When JSS7E=1 the MK50H27 will align using only SIEs, timers Tf, Ts,
To, Ta, and Te will be activated appropriately, and the SUERM will act
in accordance with JT-Q703 requiring interchanging the location of the
T and D fields in the Initialization Block. If JSS7E=1 the MK50H27 will
NOT comply with all CCITT/ITU, ANSI, or AT&T specifications.
07:00
IADR
The high order 8 bits of the address of the first word (lowest address)
in the Initialization Block. IADR must be written by the Host
prior to issuing an INIT primitive.
11 111 100 0 00 00 00 0
54 321 098 7 65 43 21 0
IADR <15:00>
0
4.1.2.4 Control and Status Register 3 (CSR3)
RAP<3:1> = 3
BIT
NAME
DESCRIPTION
15:00
IADR
The low order 16 bits of the address of the first word (lowest address)
in the Initialization Block. Must be written by the Host prior to issu-
ing an INIT primitive. The Initialization block must begin on a word
boundary.
20/56