datasheetbank_Logo
データシート検索エンジンとフリーデータシート

P/N +説明+コンテンツ検索

検索ワード :
部品番号(s) : TGL41-6
Semikron
Semikron
コンポーネント説明 : Surface Mount diode Unidirectional and bidirectional Transient Voltage Suppressor diodes

Surface Mount diode Unidirectional and bidirectional Transient Voltage Suppressor diodes

Pulse Power Dissipation: 400 W
Maximum Stand-off Voltage: 5,5...342 V

部品番号(s) : 30SMCJ
WTE
Won-Top Electronics
コンポーネント説明 : 3000W Surface Mount Transient Voltage SuppressorS

Features
● Glass Passivated Die Construction
3000W Peak Pulse Power Dissipation
● 5.0V – 170V Standoff Voltage
● Uni- and Bi-Directional Versions Available
● Excellent Clamping Capability
● Fast Response Time
● Plastic Case Material has UL Flammability Classification Rating 94V-O

部品番号(s) : TGL4168
Diotec
Diotec Semiconductor Germany
コンポーネント説明 : Surface Mount unidirectional and bidirectional Transient Voltage Suppressor Diodes

Surface Mount unidirectional and bidirectional Transient Voltage Suppressor Diodes

 • Peak pulse power dissipation               400 W
 • Nominal breakdown Voltage          6.8...520 V
 • Plastic case MELF                         DO-213AB
 • Weight approx.                                      0.12 g
 • Plastic material has UL classification 94V-0
 • Standard packaging taped and reeled

部品番号(s) : TGL3468
Diotec
Diotec Semiconductor Germany
コンポーネント説明 : Surface Mount unidirectional and bidirectional Transient Voltage Suppressor Diodes

Surface Mount unidirectional and bidirectional Transient Voltage Suppressor Diodes

 • Pulse power dissipation                   150 W
 • Nominal breakdown Voltage     6.8...200 V
 • Plastic case MiniMELF                  SOD-80
 • Weight approx.                                 0.04 g
 • Plastic material has UL classification 94V-0
 • Standard packaging taped in ammo pack see page 18

部品番号(s) : SM6A27
GE
General Semiconductor
コンポーネント説明 : Surface Mount AUTOMOTIVE Transient Voltage Suppressor

Surface Mount AUTOMOTIVE Transient Voltage Suppressor
Zener Voltage -27.0 Volts  Peak Pulse Current - 90.0 Amps

FEATURES
 Ideally suited for load dump protection
 Plastic package has Underwriters Laboratory
  Flammability Classification 94V-0
 High temperature stability due to unique oxide passiva
Exclusive patented PAR™ oxide passivated chip construction
Integrally molded heatsink provides a very low thermal resistance for maximum heat dissipation
Low leakage current at TJ=175°C
Low forward Voltage drop
High temperature soldering guaranteed: 260°C for 10 seconds at terminals

部品番号(s) : SM8A27
General
General Semiconductor
コンポーネント説明 : Surface Mount AUTOMOTIVE Transient Voltage Suppressor

Surface Mount AUTOMOTIVE Transient Voltage Suppressor
Zener Voltage -27.0 Volts  Peak Pulse Current - 130.0 Amps

FEATURES
 Ideally suited for load dump protection
 Plastic package has Underwriters Laboratory
   Flammability Classification 94V-0
 High temperature stability due to unique oxide passivation
 Exclusive patented PAR™ oxide passivated chip construction
 Integrally molded heatsink provides a very low thermal resistance for maximum heat dissipation
 Low leakage current at TJ=175°C
 Low forward Voltage drop
 High temperature soldering guaranteed: 260°C for 10 seconds at terminals

部品番号(s) : P6SMB120CAC P6SMB120CC
TSC
TSC Corporation
コンポーネント説明 : Surface Mount Transient Voltage Suppressor Voltage Range 6.8 to 200 Volts

Surface Mount Transient Voltage Suppressor

Features
For Surface Mounted application in order to optimize board space
Low profile package 
Built-in strain relief
Glass passivated junction
Excellent clamping capability
Fast response time: Typically less than 1.0ps from 0 volt to BV min.
Typical IRless than 1μA above 10V
High temperature soldering guaranteed: 250OC / 10 seconds at terminals
Plastic material used carries Underwriters Laboratory Flammability Classification 94V-0
600 watts peak pulse power capability with a 10 x 1000 us waveform by 0.01% duty cycle

Mechanical Data
Case: Molded plastic 
Terminals: Solder plated
Polarity: Indicated by cathode band
Standard packaging: 12mm tape (EIA STD RS-481)
Weight: 0.093gram

コンポーネント説明 : Surface Mount Transient Voltage Suppressor

Surface Mount Transient Voltage Suppressor
Voltage-5.0 TO 440 Volts 400 Watt Peak Pulse Power

FEATURES
• For Surface Mounted applications in order to optimize board space
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• Repetition rate (duty cycle):0.01%
• Fast response time: typically less than 1.0 ps from 0 volts to BV for unidirectional types
• Typical IR less than 1µA above 10V
• High temperature soldering: 250°C/10 seconds at terminals
• Plastic package has Underwriters Laboratory
  Flammability Classification 94 V-O

部品番号(s) : 3.0SMCJ
EIC
Electronics Industry
コンポーネント説明 : Surface Mount Transient Voltage Suppressor

Stand-off Voltage : 11 to 220V
Peak Pulse Power : 3000 W

FEATURES :
* 3000W peak pulse power capability with a 10/1000µs waveform
* Excellent clamping capability
* Low inductance
* High temperature soldering : 250 °C/10 seconds at terminals.
* Built-in stran relief
* Pb / RoHS Free

部品番号(s) : 1SMC5.0A_09
CENTRAL
Central Semiconductor Corp
コンポーネント説明 : Surface Mount UNI-DIRECTIONAL GLASS PASSIVATED JUNCTION SILICON Transient Voltage Suppressor

DESCRIPTION:
The CENTRAL SEMICONDUCTOR 1SMC5.0A Series types are Surface Mount Uni-Directional Glass Passivated Junction Transient Voltage Suppressors designed to protect Voltage sensitive components from high Voltage Transients.

THIS DEVICE IS MANUFACTURED WITH A GLASS PASSIVATED CHIP FOR OPTIMUM RELIABILITY.
Note: For Bi-directional devices, please refer to the 1SMC5.0CA Series data sheet.

MARKING CODE: SEE ELECTRICAL CHARACTERISTICS TABLE

12345678910 Next